Magnetic Drum

Advantages

• Large feeding particle size（450～0mm），no classification before feeding。

• High strength and high reliability of the mechanical structure guarantee the normal work of the magnetic drum in a variety of harsh environment.

Product Description

Permanent magnetic drum is also called magnetic pulley,apparatus magnetic equipment for magnetite ore, mainly used for pre concentration before fine crushing or grinding to remove the gangue, deads and tailings, and the tailings out rate is about 10%.

Work Principle

The materials are uniformly fed to the belt. When materials go through the permanent magnetic drum, the non-magnetic and low-magnetic particles will leave the belt surface because of the centrifugal force and gravitation. Meanwhile, strong-magnetic particles are absorbed to the belt by magnetic force and then fall into the magnetic trough when the belt leaving the magnetic pulley.

Product Application

1, It is applied in lean iron roughing after the roughing crushing or middling crushing to remove deads, improve grade, and reduce the load of the next procedure.

2, For not fully reductive raw ore of hematite reduction

3, For the ceramic industry to remove iron and improve the quality of ceramic products

4, For other industries needing to remove iron, such as Burning coal, sand casting, refractory material, etc.

Technical Parameters

Model & Spec.	Diameter of Cylinder (mm)	Length of Cylinder (mm)	Width of Belt (mm)	Surface Magnetic Density (mt)	Capacity (t/h)	Feed Size (mm)	Total Weight (t)
CTGG-0812	800	1200	1000	300~500	≤100	≤200	2.1
CTGG-0814	800	1400	1200	300~500	≤120	≤200	2.6
CTGG-0816	800	1600	1400	300~500	≤150	≤200	3.2
CTGG-0818	800	1800	1600	300~500	≤180	≤200	3.9
CTGG-1018	1000	1800	1600	300~500	≤270	≤250	4.4
CTGG-1218	1200	1800	1600	300~500	≤350	≤300	5.0

Related Articles

Related Products

Dry Separator with Eccentric Rotating Magnetic System | Magnetic Separator | Magnetic Drum |